Brake bleed valve
Rear, M6x1.0x16mm
SKU
BRA10111-1
MPN
SB-110111
Good stock
£24.05
£20.04
You might also need
Check parts to add to the basket or
TOA00011-1
Vacuum pump brake and clutch bleed set
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£119.00
£99.17
OIA11015B-1
Brake fluid
Dot 4, 1 litre
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£12.90
£10.75
OIA11030-1
Brake cleaner spray
500ml
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£5.95
£4.96
TOA37316-1
Brake and clutch bleeding kit
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£5.99
£4.99
OIA11015D-1
Brake fluid
Dot 4, 500ml
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£8.90
£7.42
Please note that one of these brake valves is required per caliper
This bleed valve replaces the standard M6 bleed nipple fitted to the rear caliper. Quite often, though, the original nipple will snap off in the insert in the caliper when you attempt removal; if this is the case, please see BRA12111, which incorporates a replacement insert too.
The innovative Stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
The Stahlbus ventilation system combines all the advantages:
This bleed valve replaces the standard M6 bleed nipple fitted to the rear caliper. Quite often, though, the original nipple will snap off in the insert in the caliper when you attempt removal; if this is the case, please see BRA12111, which incorporates a replacement insert too.
The innovative Stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
The Stahlbus ventilation system combines all the advantages:
- Completely O-ring sealed.
- The hydraulic system remains airtight during the bleeding process.
- Reliable non-return function, facilitating one-man operation.
- Bleeding of the system in a matter of minutes.
- Wear of the threads in the caliper is prevented as the upper part of the nipple unscrews from the lower part and NOT the caliper.
- For all hydraulic systems such as brakes and clutches
- The Stahlbus brake bleeder valve is a simple replacement for the existing bleed nipple.
- Tested under extreme conditions by TÜV Rheinland.
See BRA36730 for vacuum bleeder device.
See BRA19002 for good quality bleed hose.
Please do not forget to order the stahlbus dust cap, too. Only this protects the inner O-ring. The original rubber cap is too short. Stahlbus dust caps are available in a choice of colours, see BRA18001, BRA18002, BRA18003, BRA18004 and BRA18005.
| Weight | 0.020000 |
|---|---|
| Universal Part | No |
| Condition | New |
| Brand | Stahlbus |
| Modifications | Yes |
| MPN | SB-110111 |
| Metric size | M6 |
Customer Questions
Alternative parts
