Handlebar adapter from MV Motorrad Technik.
These sophisticated and elaborately milled adapters bring the handlebars 35mm closer and 20mm higher, and thus ensure a significant improvement in sitting position.
The modification takes only about 10 minutes. The original GPS mount screws from the BMW kit can be re-used.
The original brake and clutch lines remain, only one cable tie must be removed at the bottom.
The adapters have the same finish as the original yoke and handlebar.
Please note, in conjunction with this modification, you can also add our adapters for the BMW R1200R (ACA01444) and thus achieve an even more upright sitting position, although you may need longer brake and clutch hoses if doing so!
N.B. All MV accessories were assembled and tested at original motorcycles - without foreign modifications.