Made in Italy by Tommaselli.

Please note, these bars are not a direct replacement for original BMW bars; however, they can be fitted as an economical alternative.

Please check your current handlebar measurement to see if different cables are required.

Overall width is 835mm, rise is 194mm, pullback is 132mm.Internal diameter is 18mm, and there is no threaded insert, so BMW bar end weights will not fit without modification.

These are not drilled for heated grips, so if you want to fit the BMW heated grips, you will need to drill a hole in the centre of the bars, and also the two holes to locate the clutch grip.

Please note; due to manufacturing methods, there may be a small burr at the handlebar ends that will need removing with a fine file in order to fit the handlebar components.