Due to the chroming process, the lever clamps may be a tight fit with these bars.

Made in Germany by Fehling.

The overall span is 660mm and the rise is 85mm, and as such they sit halfway between the low (or 'standard') bars HAA36559 and the half rise bars HAA37661. The grip length at each side is 200mm (all sizes approximate). Internal diameter is 18mm, and there is no threaded insert, so BMW bar end weights will not fit without modification.

These are not drilled for heated grips, so if you want to fit the BMW heated grips, you will need to drill a hole in the centre of the bars, and also the two holes to locate the clutch grip.

Please note: these bars do not fit in combination with an S fairing AND a post 81 handlebar master cylinder. They are slightly too high, so the master cylinder reservoir clips the fairing.