This kit contains all of the used BMW motorcycle parts usually required when converting your A series engine to the BMW K series DOHC cylinder head and fuel injection, e.g: head, cams, valves, rocker cover, injectors, throttle bodies, throttle position switch, fuel rail, engine sub loom etc.

Kits can be tailored to your requirements e.g. with different cams, or without injectors if you are using carbs. Please call to discuss your requirements.

Parts are supplied in unmodified, serviceable, used condition with a limited 6 month warranty. We can also supply any additional new BMW motorcycle parts you require for the job e.g. valve stem seals, shims, studs etc. A 10% discount will apply to any new parts bought at the same time as the kit.

We offer full aftersales advice and support in regard to the BMW side of the project. Companies such as Specialist Components can supply the special (non BMW) parts and Mini expertise required to complete the project e.g. cam pulleys, seals, belts and head gaskets of varying thickness to alter compression. See www.specialist-components.co.uk.

All of the combustion chambers were designed to work with flat top pistons. All heads have valve seats suitable for use with unleaded fuel. This is the two valve per cylinder head. It was designed for a 67mm bore. Advantages include low cost, simplicity and ready availability. Valve clearances can be adjusted without removing camshafts (shims on top of buckets). Using valve shimming tool part no. TOA14020. This head may be better suited to road cars and turbo or supercharged applications. The bike engine it comes from is rated at approx. 90bhp.

For K1200 conversion please see ENB00004

We also stock the instruction manual from Specialist Components, see BOA00021