The following guide is for the R100GSPD built from 02/1989 to 08/1990
Model information
SAE 20W-50 API SF Mineral
Capacity 2.5 litres
SAE 80W90
Capacity 0.8 litres
SAE 80W90
Capacity 0.25 litres
SAE 10W
Capacity: Right 440ml, Left 410ml
DOT 4
Measurements taken on a cold engine:
- Intake 0.1mm
- Exhaust 0.2mm
12V 30AH
Dimensions approx (mm) 162(L) x 170(H) x 122(W)
Front 90/90 x 21
Rear 130/80 x 17
Headlight H4
Pilot 4w
Indicator 21w
Tail 21w & 5w
Maintenance schedule
- Change the engine oil and fit a new oil filter
- Check and adjust the valve clearances
- Check the operation of the clutch system
- Check the operation of the brake system
- Check throttle cable operation and freeplay
- Check spoke tension - wire spoked wheels
- Check and lubricate the stand pivots
- Check the side stand and starter circuit
- Check throttle synchronisation
- Check battery condition
- Fit a new air filter
- Bleed / test the ABS (only carried out by a BMW dealer)
- Fit new spark plugs
- Fit a new alternator belt
- Change oil in final drive / gearbox
- Change the brake fluid
- Check the tightness of all nuts and bolts
- Check the condition of wheels, wheel bearings and tyres
- Check front and rear suspension units
The information provided is for guidance only. While every effort is made to provide the correct information, errors may occur.
We do not take responsibility if a mistake is made following incorrect information provided on this guide.
If you do not own the correct tools or have the necessary experience, entrust the job to someone who is qualified.
Motorworks supply the correct parts, tools and consumables to help you carry out servicing work on your BMW.
Contact us here or call our sales team on 01484 353600 if you need any assistance and we will be happy to help!