Wunderlich have been offering side stand enlargers for BMW motorcycles for many years and they offer model specific enlargers for nearly every model since 1994.
Their design is simple, easy to install and time tested. The side stand enlarger is made of machined anodized aluminium and it features a serrated edge to provide a better grip when deploying the stand.
Considering the weight of the F650GS and F700GS Twin, the original side stand plate at roughly 2"x 2" is on the small side to offer secure support, especially when parking on loose ground or hot asphalt.
Their side stand enlarger increases the surface area by approximately 50% and provides the needed support and peace of mind.
The part is precisely shaped so that there is no interference with any other part of the bike and it is also visually unobtrusive.
The three clamping screws hold the enlarger firmly in place with no drilling or other modifications needed. Be sure to place a few drops of thread locking fluid on the screws to avoid them backing out and the part falling off.
The facts:

Safe support for the machine on all surfaces

Compensates for the leaning angle of the motorcycle

Surface area increased by more than 100%

8 mm thick Dural aluminium

Rustproof anodised black

Rust protection for the original stand plate

Cut-out for original foot lined with vibration-absorbing foam rubber

CNC machined

Easy to fit.